Kanro Co., Ltd. Implements Flexible Solar G+ at Hikari Factory
In a noteworthy advancement for renewable energy, Kanro Co., Ltd. has adopted the innovative Flexible Solar G+ system at its Hikari Factory located in Yamaguchi Prefecture. This installation has been facilitated by Denkosha Co., Ltd., known for promoting decarbonization since its foundation in 1926. Under the guidance of Sumitomo Mitsui Banking Corporation, the project has installed ultra-lightweight resin modules, designed specifically for solar power generation, on the factory's roof.
The introduction of the Flexible Solar G+ system marks a significant milestone, as it enables the installation of solar panels across the entire roof area of the Hikari Factory. Traditional glass panels could initially only be positioned on limited sections of the roof due to their heavier weight. However, the new resin modules, weighing less than half of standard glass panels, have made full utilization of the roof possible.
With a remarkable capacity of 833.25kW, this new solar power system ranks among the largest of its kind in Japan, particularly noting its ultra-lightweight technology. It is projected that this system will generate approximately 981,684 kWh of electricity within the first year, contributing to a significant reduction in carbon emissions by an estimated 421.1 tons annually.
Detailed specifications of this solar power system highlight its capabilities:
The Flexible Solar G+ brand, developed by Denkosha, focuses on the premise that renewable energy generation should not be limited to conventional spaces. Since its launch two years ago, it employs unique adhesive construction techniques to safely install solar panels in various challenging environments, including factories, warehouses, office buildings, public facilities, and greenhouses.
DAS Solar’s ultra-lightweight resin modules were selected for this project due to their impressive features:
1. Lightweight Design: At just 4.7 kg per square meter, these panels are considerably lighter than traditional solar panels, allowing installation on buildings that previously could not support the weight.
2. Top-tier Efficiency: Utilizing the latest N-type TOPCON technology, these panels achieve performance levels comparative to high-efficiency glass panels.
3. Globally Trusted Manufacturer: DAS Solar ranks as one of the world's leading solar panel manufacturers, positioned ninth globally in terms of annual output volume by 2024.
For further product details, visit the official Flexible Solar G+ website.
[Kanro Co., Ltd. Overview]
[Denkosha Co., Ltd. Overview]
The introduction of the Flexible Solar G+ system marks a significant milestone, as it enables the installation of solar panels across the entire roof area of the Hikari Factory. Traditional glass panels could initially only be positioned on limited sections of the roof due to their heavier weight. However, the new resin modules, weighing less than half of standard glass panels, have made full utilization of the roof possible.
With a remarkable capacity of 833.25kW, this new solar power system ranks among the largest of its kind in Japan, particularly noting its ultra-lightweight technology. It is projected that this system will generate approximately 981,684 kWh of electricity within the first year, contributing to a significant reduction in carbon emissions by an estimated 421.1 tons annually.
Detailed specifications of this solar power system highlight its capabilities:
- - Panel Capacity: 833.25 kW
- - System Output: 625.00 kW
- - Adopted Panels: Denkosha Flexible Solar G+ (DAS Solar DAS-LF120NE)
- - Estimated Annual Generation: 981,684 kWh (first year)
- - Estimated CO2 Reduction: 421.1 tons (first year)
The Flexible Solar G+ brand, developed by Denkosha, focuses on the premise that renewable energy generation should not be limited to conventional spaces. Since its launch two years ago, it employs unique adhesive construction techniques to safely install solar panels in various challenging environments, including factories, warehouses, office buildings, public facilities, and greenhouses.
DAS Solar’s ultra-lightweight resin modules were selected for this project due to their impressive features:
1. Lightweight Design: At just 4.7 kg per square meter, these panels are considerably lighter than traditional solar panels, allowing installation on buildings that previously could not support the weight.
2. Top-tier Efficiency: Utilizing the latest N-type TOPCON technology, these panels achieve performance levels comparative to high-efficiency glass panels.
3. Globally Trusted Manufacturer: DAS Solar ranks as one of the world's leading solar panel manufacturers, positioned ninth globally in terms of annual output volume by 2024.
For further product details, visit the official Flexible Solar G+ website.
[Kanro Co., Ltd. Overview]
- - Name: Kanro Co., Ltd.
- - Location: 3-20-2 Nishi Shinjuku, Shinjuku-ku, Tokyo, 163-1437
- - CEO: Tetsuya Murata
- - Established: May 6, 1950
- - Business Focus: Manufacturing and sales of confectionery and food products
- - Capital: 28,640 million yen
- - Website: kanro.co.jp
[Denkosha Co., Ltd. Overview]
- - Name: Denkosha Co., Ltd.
- - Location: 2-10-4 Shiba, Minato-ku, Tokyo, 105-0014
- - CEO: Nobuya Nakajima
- - Established: February 11, 1928
- - Business Focus: Development, maintenance, and sales of solar and wind power equipment, energy conservation solutions, and subsidy application assistance
- - Capital: 90 million yen
- - Website: de-denkosha.co.jp
Topics Energy）
【About Using Articles】
You can freely use the title and article content by linking to the page where the article is posted.
※ Images cannot be used.
【About Links】
Links are free to use.