#Japan #Tokyo #Raise3D #3DPrinter #RMS220

Introducing the Raise3D RMS220

Japan 3D Printer Co. Ltd., known for providing digital 3D solutions to businesses and educational institutions, announces the launch of the highly anticipated Raise3D RMS220, a new powder sintering SLS 3D printer. This launch follows their partnership with Raise3D as the exclusive distributor in Japan since 2017.

The RMS220 stands out with its compact design, measuring just 861 x 685 x 560 mm while offering a spacious build volume of 220 x 220 x 350 mm. It incorporates an advanced modular system with a replaceable build cartridge, ensuring high throughput, consistent production, and efficient material changes.

Key Features of the RMS220

1. High Output Laser and Fast Scanning System: Powered by a 75W laser, the RMS220 can manage complex prototypes and high-throughput production, achieving up to 30,000 mm/s in scan speed which meets industrial demands with unmatched efficiency.

2. Compact Footprint with Superior Volume: Despite its small footprint of just 0.58 square meters, the RMS220 offers one of the largest print volumes among entry-level industrial SLS 3D printers, catering to a diverse range of user needs—from small batch production to designing medium and large parts.

3. RFID Management System: An innovative feature integrated within the RMS220 is the RFID technology, which automatically recognizes and configures the materials used, enhancing user experience and material management while ensuring optimal print quality.

4. Quick and Efficient Material Replacement: The RMS220 promises a reduction in material exchange time to just 45 minutes, significantly less than traditional processes. The design promotes thorough cleaning and ease of access, making it much simpler to switch between different materials and adapt to varying production needs.

5. Ergonomic Design: To mitigate user fatigue during prolonged operations, the RMS220 is complemented by the C220-P cleaning station, designed for both standing and seated use, improving the efficiency of post-processing tasks.

Event Launch and Details

On September 11, 2025, Japan 3D Printer Co. will host a product unveiling event for the RMS220 at the AP Shinagawa Conference Hall from 13:30 to 16:30, beginning registration at 12:30. This event is open on a pre-registration basis with limited slots for 100 participants.

Location: AP Shinagawa, 8F, Shinagawa Tokyu Building, 1-6-31 Konan, Minato, Tokyo
Access Information: Approximately a six-minute walk from the Minato Exit of Shinagawa Station, accessible by the Tōkaidō Shinkansen, JR lines, or Keikyu Railways. It takes about 14 minutes from Haneda Airport via the Keikyu Rapid Express.

Specifications of the RMS220

• - Build Area: 220 x 220 x 350 mm
• - Laser Power: 75W
• - Material Compatibility: Supports Raise3D PA12 and its variants
• - Max Scan Speed: 30,000 mm/s
• - Production Rate: 2.2L/h (20% density)
• - Operating Temperature: Up to 220℃

For more information about the RMS220, visit Japan 3D Printer's official website: Raise3D RMS220 and learn about how this extraordinary printer can enhance your production capabilities and meet your creative needs effectively.

About Japan 3D Printer Co. Ltd.

Headquartered in Chuo-ku, Tokyo, Japan 3D Printer has been dedicated to providing solutions in 3D printing since its establishment in October 2013, serving a diverse clientele through specialized services and support.